(413) 566-1255
Abrasive Media Blasting Equipment
With BLAST-IT-ALL comes the assurance of quality and reliability in designing and manufacturing cleaning and finishing systems now in use worldwide. Experience and expertise combine to advance the art of cleaning, peening and finishing metals to meet industries continuing demands.  
Dust Collectors 
The M series collectors are of cartridge type with auto cleaning and are designed and built for continuous duty operation. The units are designed for use with abrasive blast systems.
Air Flow: M-2 400 & 700 CFM & M-4 900 CFM
M-2: Approximately 36″ L x 18″ W x 90″ H with legs for 5 gallon dust drum
M-4: Approximately 47″ L x 36″ W x 90″ H with legs for 5 gallon dust drum
Construction: Standard construction of the unit is 11 gauge hot rolled steel, reinforced to maintain structural integrity to 15″ W.G. All wiring, air piping, solenoids and valves are mounted externally. Inlet sizes 6″ through 8″.
Filter Cartridges: Filters are replaceable cartridges. Each filter has approximately 103 square ft of filter media. P/N: (011519).
Number of Cartridges: This collector is fitted with two filter cartridges. Cartridges are changed from the outside of the unit.
-M-2: 400 CFM 1/2 hp 120 volt single phase
-M-2: 700 CFM 1 hp 120 volt single phase
-M-4: 700 CFM 1 hp 120 volt single phase
Pulse Cleaning: An adjustable timer for controlling the “ON” and “OFF” time of the air pulse is enclosed in a NEMA-12 control panel. A magnahelic gauge is provided for monitoring the differential pressure drop.
Blasting by-products are collected in a series of vertically mounted, closed end, dust bags suspended on a spring mounted holder. The dust bags are housed in a metal cabinet constructed of high quality steel, with a corrosion resistant enamel finish. Dust is shaken from the bags by a high frequency vibrator mounted on the bag holder. Standard control of the shaker mechanism is by a manually operated air switch, or by an optional automatic shaker control. Dust removed by the shaking process is deposited in the dust sump. Dust and blasting by-products are easily removed for disposal by a slide valve located at the bottom of the sump.
D-10 Pull Through:
For (700 CFM) Reclaimer
42″ W X 25″ D X 80″ H
1 Hp Motor
Manual Pneumatic Bag Shaker
25 Dust Bags (11-349)
D-20 Pull Through:
For (900 CFM) Reclaimer
52″ W X 33″ D X 80″ H
2 Hp Motor
Manual Pneumatic Bag Shaker
49 Dust Bags (11-349)
Standard Dust Bag 
Material: Cotton Sateen
Weight: 9.6 Oz Per Sq Yd.
Thread Count: 96 X 60
Air Permeability: 10 to 20 CFM
Construction: All Seams Overlap
Attachment: Screw Type Clamp
(11-415) Dust Bag 300 – 400 CFM (18″ Diameter X 56″ Long)
Single Bag Construction
5″ Inlet 25 Sq Ft Of Filtration
(11-715) Dust Bag 600 – 700 CFM (18″ Diameter X 70″ Long)
Double Bag Construction
6″ Inlet 30 Sq Ft Of Filtration
Dual Blast Cabinets
Blast-It- All Blast Cabinets