Blast Cabinets- Blasting Cabinets
Order Desk (413)-566-0037
Pressure Blast Cabinet 4426
AMS Pressure blast cabinets will deliver many years of low maintenance productivity . Our bestAbrasive blasting cabinet media valves and pistol grip blasting cabinet guns will provide a steady stream of media flow , reclaimer and dust collector systems will provide superior blasting cabinet visibility , superior media management and dust control by means of reclaimer separators and dust collector systems. Efficient blast cabinet cleaning is delivered while maintaining a clean surrounding work area. Production rates are determined by nozzle size, compressor output , working pressure, type and size of media, angle and distance of the nozzle from the blast surface. The Industrial Series blast cabinets incorporate a 3 component system.
1. Blast Cabinet
3. Dust Collector
Industrial Blast Cabinets built for Production, Versatility , Ease of Operation and Low Maintenance.
Industrial Blast Cabinets Series are the most feature rich Blasting Cabinets in the line up. Cabinets are offered in Single and Dual Work Station along with the Cube Blast cabinet for processing large parts. Cube models are offered in Standard and Special model options. Various Voltage options are available. All Industrial Series Cabinets are equipped with the Electronic Door Safety Lockout System and Ergonomic Foot Valve: For instant Changing from right to left foot On/Off Air Logic Controls. All models are available in Suction or Pressure Abrasive delivery systems. Set in turn tables, loading tracks with cart mounted turntables are available for efficiency improvements in component loading and blasting.
PRESSURE BLAST CABINET 4426, 44" WIDE x 26" DEEP x 30" HIGH, 1/4" BORE TUNGSTEN CARBIDE MEDIA BLAST NOZZLE, 1 CU.FT. PRESSURE POT,1/2 ID BLAST HOSE, PILOT SLAVE REGULATOR, MOISTURE SEPERATOR, ADJUSTABLE MEDIA VALVE, AUTO BLOW DOWN, AVAILABLE IN 10 MODELS STARTING WITH 700 CFM RECIAMER WITH EITHER THE DC-10 OR M-2 AUTOMATED DUST COLLECTOR. SINGLE PHASE OR 3 PHASE POWER AVAILABLE.
AVAILABLE MODELS (SINGLE PHASE 115/1/60)
◾700 CFM RECLAIM WITH DUST BAG - 4426-7P (1 DB)
◾700 CFM RECLAIM WITH D-10 DUST COLLECTOR - 4426-7PDC
◾700 CFM RECLAIM WITH M2 DUST COLLECTOR - 4426-7PM2DC
AVAILABLE MODELS (THREE (3) PHASE - SPECIFY VOLTAGE)
◾700 CFM RECLAIM WITH DUST BAG - 4426-7P-3 (1 DB)
◾700 CFM RECLAIM WITH D-10 DUST COLLECTOR - 4426-7PDC-3
◾700 CFM RECLAIM WITH M2 DUST COLLECTOR - 4426-7PM2DC-3
◾900 CFM RECLAIM WITH D-20 DUST COLLECTOR - 4426-9PDC-3
◾900 CFM RECLAIM WITH M4 DUST COLLECTOR - 4426-9PM4DC-3
◾900 CFM RECLAIM WITH RPJ2 DUST COLLECTOR - 4426-9PRPJ2-3
◾900 CFM RECLAIM WITH RPJH2 DUST COLLECTOR - 4426-9PRPJH2-3
◾Cabinet Construction:14 Gauge Reinforced Continuously Welded High Angle Sump
◾Finish: Durable Enamel Primed and Painted. Corrosion Resistant
◾Working Chamber: Dimensions: 44"W x 26"D x 30"H
◾Double Walled Doors
◾Safety Door Interlocks Self Adjusting Door Latches
◾Doors Knife Edged, Self Sealing, Full Gaskets
◾Full Length Hinges
◾Viewing Window:12.5"H x 21"W
◾Quick Change, Square Cornered, Tempered Glass
◾Mylar Protector With Included Dispenser
◾Lighting: Two-Tube, 24" Fluorescent Fixture Low Temperature, Shielded, Externally Located
◾120 V 60 Hz
◾Foot Valve: For instant Changing From Right to Left Foot On/Off Air Logic Controls
◾Abrasive Resistant, Cloth Lined, Full Length Snap-In, Static Resistant Gauntlet
◾Hoses: 1/2" ID. Lightweight, Flexible, Abrasive Resistant
◾Fingertip Control Blow Off Nozzle
◾Blasting Nozzle: Tungsten Carbide, 1/4" Standard
◾Tungsten ASME Coded, one (1) cu. ft. capacity air pressure, remote controlled Automatic Refilling
◾Heavy Screen Drawer
Air (approximate) Requirements 40 PSI 60 PSI 80 PSI
3/16" nozzle 21 CFM 32 CFM 41 CFM
1/4" nozzle 41 CFM 56 CFM 72 CFM
5/16" nozzle 64 CFM 88 CFM 113 CFM
◾Pressure Pot Upgrade to 3.0 cu. ft. Standard Cone
◾Pressure Pot Upgrade to 6.0 cu. ft. Standard Cone
◾Pressure Pot Upgrade to 3.9 cu. ft. 60° 2 Outlet Cone w/ Two (2) Automatic Plunger Valves
◾PMB Upgrades (Plastic Media)
◾High Static (Heavy Media) Upgrade
◾Set-In Turntable (500 LB Capacity)
◾Track Assembly (500 LB Capacity)
◾Turntable & Track Assemblies (500 LB Capacity)
◾Heavy Duty Turntable & Track Assemblies (1000 LB Capacity)
◾Two (2) Gallon Tumble Basket, Adjustable Timer, 6 RPM Gear Motor, Gun Mount Rod & Bracket (25 LB Capacity)
◾Wear Kit - Reclaim Wear Plate, Tungsten Carbide Nozzle, Rubber Curtains (Sides & Back)
Pressure Blast Cabinets
•Greater media velocity. A pressure blast machine produces greater abrasive particle velocity than a suction blast machine which means faster cleaning of tough contaminants.
•Moves more media. More abrasive particles are propelled against the work surface per minute, for a given nozzle size. Again, this translates into greater productivity, particularly on difficult applications
•Greater stand-off distance. Because the abrasive particles are moving faster to begin with, you can increase the stand-off distance of the blast nozzle from the work surface, producing a larger blast pattern while still achieving velocities great enough to clean the work. Again, this translates into greater overall productivity than a suction blast machine.
•More productive. As a general rule of thumb, pressure abrasive blast machines are four times as productive as suction abrasive blast machines
Direct Pressure model incorporates a 1.0 cubic foot ASME Coded pressure pot . It is designed for production applications . The pressure pot is used to pneumatically push the abrasive media which produces faster abrasive velocities than the typical siphon blast machine.
Operation with heavier blasting media, through hole part blasting, higher abrasive frictional heat and blind-hole cleaning are all advantages when using any Direct Pressure type of blasting cabinet.
Pressure Blast Cabinets
Specially designed to increase blasting productivity pressure blast cabinets will be the answer to all your blasting needs for fast results tough jobs and for Abrasive blasting performance in hard to reach areas. AMS standard Pressure blast cabinets utilize the one cubic foot pressure vessel that forces media through the blasting hose and tungsten carbide nozzle. After impact on the work piece abrasive (glass bead, aluminum oxide or other reclaimable light weight media) is transferred to the reclaimer that separates reusable media while dust is exhausted into the dust collector. AMS Blast cabinets are equipped with high efficiency reclaimer and dust collectors.
1.Surface preparation for bonding.
2.Removing excessive flash left for molds.
3.Removing scale from casting.
4.Cleaning engine and high pressure welded parts.
5.Removing brazing residue.
6.Peening and stress relieving.